Belonging category：Cremation equipment Publishing Date：20250418 views：27
System parameters of high-grade ash picking cremator in funeral parlour
1. Preparation door system: The preparation door control system adopts computer automatic control with LED display screen to ensure the operation of two sets of operating systems in the front hall and the back hall. Equipped with high-grade color LCD touch screen for easy operation, the micro-motor is used to drive the reducer to hydraulically control the preparation door to open and close automatically, and the exterior decoration is made of high-quality super-grade stainless steel plate, which is beautiful and elegant, and has sound insulation and noise reduction.
2. Cooling system: After the remains in the cooling room are incinerated, the ashes are cooled in the cooling room. The cooling room is composed of an outer skeleton and a decorative board, and is cooled by a variable frequency fan. When the temperature is lower than the ash picking temperature, it will automatically give an alarm to remind you, thus shortening the waiting time for bereavement.
3. Heat collector: A hot air heat exchange device made of a new type of high-strength corrosion-resistant, high-temperature and high-manganese stainless steel material is placed in the furnace body to provide oxygen temperature, which has high heat transfer efficiency, good heat absorption and rapid temperature rise, and can quickly raise the air temperature to above 400℃ to achieve combustion-supporting, enhanced combustion, energy saving and consumption reduction, accelerated incineration speed and shortened incineration time.
4. Combustion system: High-quality energy-saving burner is adopted, which can automatically ignite, control furnace temperature and pressure, control oil consumption, automatically adjust electric damper, adjust combustion angle and smoke damper.
High-grade cremator control system:
5. Computer control system: TFT color LCD touch screen, special computer control (PLC) for cremation machine, which can achieve synchronous dynamic display of color and video frequency animation, has fault diagnosis display and perfect protection function, and is equipped with three operating systems without interference switching: manual, semi-automatic and computer full-automatic. The system is safe, stable, reliable, convenient for maintenance and equipped with automatic explosion-proof function.
6. Electrical components: high-quality low-voltage electrical components are adopted, and the pressure and temperature of the furnace are automatically detected by using the pressure module and the temperature module.
7. Electrical control cabinet: a separate electrical control cabinet is adopted, which is equipped with electrical protection functions such as overload and short circuit and comprehensive control functions of the system.
8. The working voltage of the system is 380 V 5% (three-phase five-wire system).
9, electrical control working voltage of 220VAC, 24VDC.
Air supply system of high-grade cremator:
10. The air duct is made of new high-temperature resistant and high-manganese stainless steel material, which has corrosion resistance, high stability and high compressive strength.
11. The blower adopts a pulse blast system, and the blower uses a 7.5 kW high-pressure fan with a wind volume of 1050~1200m3/h; The wind pressure is 10000~12500pa.
12. The small air duct at the end of the combustion-supporting air duct in contact with high temperature is made of high-temperature resistant material; Manufacture of φ20*2.5 seamless pipe. The rest are made of φ159 steel pipe, which is resistant to high temperature and corrosion.
Smoke exhaust system of high-grade cremator:
13. The ejector fan adopts Venturi ejector system, with 7.5 kW high pressure and high air volume fan with air volume of 3650~4200m3/h; Wind pressure 4000~6000pa
14. The ejector liner is made of 3mm high-quality stainless steel plate, which has high temperature resistance and long service life.
15. The ejector chimney is made of 3mm thick stainless steel plate, and the first section buried underground is made of 3mm thick stainless steel plate. The structure is jet structure, which is resistant to high temperature and corrosion, and the height of the chimney is 8-12m.
16. The flue of the flue structure system adopts refractory bricks, insulation bricks, aluminum silicate fiber mats, waterproof reinforced concrete protective layers, and the waterproof performance ensures long-term non-leakage.
17. The pressure control system uses the controller to control the ram to lift and automatically adjust the furnace pressure and control it within the range of-2 ~-50 Pa.
Television monitoring system of high-grade cremator
18. High-definition camera uses high-definition camera to capture smoke emission, which is convenient for operation.
19. Color display In order to ensure that the combustion emission reaches the best state and is easy to adjust and operate, the equipment adopts color display to dynamically display the outdoor smoke emission.
Oil supply system of high-grade cremator
20. The fuel tank is made of Angang profile and plate, and its capacity meets the fire protection requirements.
21. The pipeline from the oil tank to the burner is wrapped with sealant tape, so as to avoid oil leakage and fasten the sealing effect.
22. The national standard micro flowmeter measures the oil consumption and the oil pipeline controls the oil distribution.
23, control valve protection oil control system