Belonging category：Cremation equipment Publishing Date：20250418 views：37
Technical requirements of high-grade ash-picking cremator in funeral parlour-specification and performance introduction of high-grade cremator
1. The external dimensions of the furnace body L× W× H = 3600× 2400× 2500mm (2%).
2 main combustion chamber size l× w× h = 2500× 700× 800 mm (2%)
The average fuel consumption of continuous cremation is 8-15kg/ set.
4 Use fuel 0-10# light diesel oil
5 The average cremation time of continuous cremation is 35 ~ 50 minutes/set.
6 The working temperature of the main combustion chamber is 600-900℃
7 The working pressure of the main furnace is-5 ~ -5～-30Pa.
The automatic control system is equipped with high-quality imported PLC intelligent control system and color LCD touch screen operation, which can realize three undisturbed switching operations: full automatic, semi-automatic and manual. With the whole cremation process display system, it can clearly display the cremation time, fuel consumption, pressure, temperature and other technical parameters.
9 Multi-picture dynamic monitoring system adopts color video monitor, which has the effect of multi-picture dynamic display, and can monitor the working conditions of front hall and back hall, the transmission (cooling) process of corpse car and smoke emission at the same time, grasp the running state of equipment in real time and realize remote monitoring.
10 The furnace frame is made of high-quality national standard Q23A540 * 40 square tube, which has firm welding, uniform weld seam, durability and no deformation after long-term use.
The exterior decoration of the furnace is made of high-quality stainless steel plate, which is beautiful and easy to disassemble and assemble.
The door and switch system are made of high-quality national standard Q235A profiles and plates, and are luxuriously decorated with high-quality stainless steel plates. The switch system is controlled by frequency converter and driven by motor and reducer. The switch is stable, accurate and noiseless.
The refractory of the furnace is made of high-quality refractory with high temperature resistance, and the refractory temperature can reach above 1200℃. It has the characteristics of small heat loss, rapid temperature rise in the furnace, corrosion resistance, resistance to quenching and sudden heating, no crack and slag drop after long-term use, and long service life.
High-quality and high-quality thermal insulation materials are used for furnace insulation materials, which can achieve the characteristics of good furnace insulation performance and slow heat dissipation. When the furnace is stopped for 24 hours, the furnace temperature shall not exceed 200℃, and the average surface temperature of the furnace body shall not be higher than 30℃.
15 cars and transmission system luxury sports cars are made of high-quality national standard Q235A profiles and plates, and are luxuriously decorated with high-quality stainless steel plates. The motor and reducer are controlled by frequency converter and mechanically driven, with stable operation, accurate positioning and low noise. When the dead body on the platform enters the furnace, it adopts mechanical jacking method, the bed surface is closely combined with the furnace body, the sealing effect is good, and no heat dissipation occurs. ※.
The mechanical drive lifting system of oven door has the advantages of stable operation, low failure rate, good sealing performance, reliable operation and convenient maintenance.
The combustion system adopts high-quality movable energy-saving and environment-friendly high-efficiency burner, which can automatically ignite and control the furnace temperature and pressure. ※ The burner angle can be adjusted at will, and the fuel consumption can be controlled, with remarkable energy-saving effect.
18 The cooling system adopts lifting cooling mode (low noise induced wind in the cooling system), and the average cooling time is about 10 minutes.
19 The blower of air supply system is 5.5KW, with shock absorption and positioning, and small vibration. The air outlet is connected by rubber telescopic flange, which is well sealed and does not leak air. The air supply pipeline is made of high-quality seamless steel pipe with high temperature resistance, corrosion resistance and high compressive strength, which is embedded and installed, beautiful and practical.
The preheating system is made of high-quality high-temperature and corrosion-resistant materials, which can fully absorb the waste heat generated during combustion, have good recovery effect and high heat transfer efficiency, and achieve remarkable effects of supporting combustion and accelerating cremation speed.
The oil supply system is made of high-quality seamless steel pipe, which is well sealed, corrosion-resistant and oil-free. Equipped with high-quality national standard flowmeter, it can accurately measure fuel consumption.
22. The power of the induced draft fan of the smoke exhaust system is 7.5Kw, with shock absorption positioning and small vibration. The air outlet is connected by rubber telescopic flange, which is well sealed and does not leak air. The ejector liner, base and chimney are made of high-quality national standard high-temperature and corrosion-resistant steel plates.
Electrical components and cables of electrical control system adopt domestic famous brand electrical components and domestic high-quality multi-strand copper core cables. Adopt internationally accepted plug-in installation.
The electrical control cabinet adopts an independent electrical control cabinet, which has the functions of electrical protection such as overload and short circuit and comprehensive control of the system.
Pressure and temperature control The pressure module and temperature module are used to automatically detect the pressure and temperature of the furnace, so as to control the temperature of the furnace, control the lifting of the flue gate and adjust the pressure of the furnace.
The working voltage of the system is 380v 5% (three-phase five-wire system).
Control the working voltage of 220VAC and 24VDC.
24 Furnace explosion-proof device ※ Equipped with furnace explosion-proof device, it can effectively and automatically control the furnace pressure during cremation, and its safety performance is reliable.
The amount of bone ash is fully burned, and the ashes are pure white without sundries.
26 Smoke emission and noise smoke emission meet the relevant national standards for cremation tail gas emission; Low noise, no peculiar smell in the cremation room, meeting the requirements of the latest national standard of GB13801-2015.